MUON-DUO

EV Charger from 7.4 to 2х22 kW

installation of the station 30 min

PARALLEL CHARGING

Charging Standards

GB/T

Type 1

Type 2

Different mounting options:

Lightpost-mounts
Wall-mounts
Pedestal stand

MUON-DUO

Dual connector commercial EVSE,
when two synchronous charge connectors are needed.
44 kW power with 2 connectors in a compact protected “wallbox” format. Ready-to-use solution for quickly starting a commercial charging infrastructure based on OCPP 2.0.1 protocol.

EXTERIOR

Ergonomic design
Front panel made of tempered glass
Integrated LED dynamic backlight
Power independent e-ink service display
Stainless steel case
Powder coating of the body and pedestal
Full water and dust protection (IK10, IP54)

INTEGRATED ELECTRONICS

Full spec charge and safety controller
Integrated camera and radar for vehicle detection
Overtemperature protection on all power elements
Current leakage sensors and overcurrent protection
Integrated 3G/4G and GPS PERFORMANCE
Voice notifications

SAFETY

Integrated RCD
Overcurrent protection
Surge protection, type 1-2-3 4.
Over/undervoltage protection
Stand by voltage detection
<10ms protection reaction time

Technical specifications

Input	3-phase, 0,4 kV, 50 Hz
Nominal voltage	400V +/-10%
Introductory device, Type, number	C, 4-pole, 63A
Grounding system	TNS \| 3F-N-PE
Cable connection	6-16 mm2
Short circuit current	< 10,0 кА
Connector types	Type 2 plug; Type 2 socket; Gb/T plug. Two connections to choose
Charging method	IEC 61851
Radio modem	3G/4G
RFID	ISO 14443
OCPP	2.0.1
Protection class	IP 54, IK 10
Operating temperature	-35…+55

Instruction Datasheet Presentation

24/7 monitoring

Remote control and service monitoring

Automatic update

Automatic software update

Service support

We are always ready to help you

Leave a request