AC
MUON
EV Charger
from 7.4 to 22 kW
installation of the station
30 min
Branding
of front panel
Charging Standards
GB/T
Type 1
Type 2
Different mounting options:
- Lightpost-mounts
- Wall-mounts
- Pedestal stand
MUON-22
Single connector, commercial EVSE,
specifically designed for harsh environment
of commercial charging networks. 22 kW power output.
Quick and easy installations. Within 30 minutes EVSE is ready and operational for commercial use.
We’ve minimized your CAPEX cost to create better ROI
on your commercial network.
EXTERIOR
- Ergonomic design
- Front panel made of tempered glass
- Integrated LED dynamic backlight
- Power independent e-ink service display
- Stainless steel case
- Powder coating of the body and pedestal
- Full water and dust protection (IK10, IP54)
INTEGRATED ELECTRONICS
- Full spec charge and safety controller
- Integrated camera and radar for vehicle detection
- Overtemperature protection on all power elements
- Current leakage sensors and overcurrent protection
- Integrated 3G/4G and GPS PERFORMANCE
- Voice notifications
SAFETY
- Integrated RCD
- Overcurrent protection
- Surge protection, type 1-2-3 4.
- Over/undervoltage protection
- Stand by voltage detection
- <10ms protection reaction time
Technical specifications
| Input | 3-phase, 0,4 kV, 50 Hz |
| Nominal voltage | 400V +/-10% |
| Introductory device, Type, number | C, 4-pole, 32A |
| Grounding system | TNS | 3F-N-PE |
| Cable connection | 6-16 mm2 |
| Short circuit current, I s.c. | < 10,0 кА |
| Connector types |
Type 2 plug; Type 2 socket; Gb/T plug. |
| Charging method | IEC 61851 |
| Radio modem | 3G/4G |
| RFID | ISO 14443 |
| OCPP | 2.0.1 |
| Protection class | IP 54, IK 10 |
| Operating temperature | -35…+55 |
24/7 monitoring
Remote control and service monitoring
Automatic update
Automatic software update
Service support
We are always ready to help you
Contact us
Leave a request